HomeEngineeringRubber Weight Calculator

Rubber Weight Calculator

Calculate rubber sheet and mat weight instantly. Enter dimensions and rubber type to get accurate weight estimates for natural, neoprene, nitrile, and more.

Ask a question to get your result

Frequently Asked Questions

Common questions about rubber weight.

Natural rubber has a density of approximately 74 lb/ft³ (1,186 kg/m³). This can vary slightly depending on additives, fillers, and processing methods, but 74 lb/ft³ is the standard reference value for pure natural rubber.

Use a caliper or micrometer for precise thickness measurements. Digital calipers accurate to 0.01mm work well for most applications. For very thin sheets, measure in multiple spots and take an average, as thickness can vary slightly.

Yes, different rubber types have different densities. EPDM is heaviest at 88 lb/ft³, while nitrile is lightest at 68 lb/ft³. For the same dimensions, an EPDM sheet can weigh about 30% more than a nitrile sheet.

Natural rubber (74 lb/ft³) falls in the middle range. Neoprene is denser at 83 lb/ft³, while silicone is similar at 71 lb/ft³. The difference matters for large orders or applications where weight is critical, like aerospace or portable equipment.

Multiply pounds by 0.453592 to get kilograms. For example, a 50-pound rubber sheet weighs 22.7 kg. Most calculators provide both units, but this conversion is useful for international shipping or specifications.

How to Calculate

To calculate rubber weight, enter the dimensions (length, width, thickness) of your rubber sheet or mat, select the rubber type, and specify quantity if ordering multiple pieces. The calculator uses the formula **Weight = Length × Width × Thickness × Density × Quantity** to determine total weight. Different rubber types have different densities: natural rubber (74 lb/ft³), neoprene (83 lb/ft³), nitrile (68 lb/ft³), silicone (71 lb/ft³), and EPDM (88 lb/ft³). Make sure all dimensions are in consistent units before calculating.

Formula & Method

Weight = Length × Width × Thickness × Density × Quantity

Where density varies by rubber type:
- Natural Rubber: 74 lb/ft³ (1,186 kg/m³)
- Neoprene: 83 lb/ft³ (1,330 kg/m³)
- Nitrile: 68 lb/ft³ (1,089 kg/m³)
- Silicone: 71 lb/ft³ (1,138 kg/m³)
- EPDM: 88 lb/ft³ (1,410 kg/m³)

Sources & References

https://www.matweb.com/
https://www.astm.org/products-services/standards-and-publications.html
https://www.engineeringtoolbox.com/

Related Calculators

Acrylic Weight Calculator

Calculate acrylic sheet weight instantly by entering dimensions and thickness. Get results in pounds and kilograms for cast or extruded Plexiglas sheets.

→

Cork Weight Calculator

Calculate cork weight instantly for sheets, tiles, and panels. Enter dimensions and quantity to get accurate weight in pounds based on cork's 15 lb/ft³ density.

→

Foam Board Weight Calculator

Calculate foam board insulation weight instantly for EPS, XPS, and Polyiso sheets. Get accurate weights based on dimensions and density for project planning.

→

Teflon (PTFE) Weight Calculator

Calculate the weight of PTFE/Teflon sheets, rods, and tubes instantly. Enter dimensions and get accurate weight estimates for engineering and procurement.

→

Content reviewed by the ProCalc.ai editorial team · About our standards