HomeEngineeringBronze Weight Calculator

Bronze Weight Calculator

Calculate bronze weight instantly for plates, bars, and cylinders. Enter dimensions, get accurate weight in pounds or kilograms using standard bronze density.

Ask a question to get your result

Frequently Asked Questions

Common questions about bronze weight.

Standard bronze (copper-tin alloy) has a density of approximately 541 lb/ft³ or 8.67 g/cm³. Different bronze alloys vary slightly: aluminum bronze is lighter at ~490 lb/ft³, while phosphor bronze is slightly denser at ~548 lb/ft³.

Multiply length × width × thickness to get volume, convert to cubic feet, then multiply by 541 lb/ft³. For example, a 12" × 12" × 1" plate is 1 ft³ ÷ 12 = 0.0833 ft³, which weighs about 45 pounds.

Bronze (541 lb/ft³) is actually slightly lighter than steel (490 lb/ft³), though the difference is minimal. Bronze is significantly heavier than aluminum (168 lb/ft³) but lighter than lead (710 lb/ft³).

Bronze is primarily copper and tin, but aluminum bronze adds aluminum for strength and corrosion resistance, phosphor bronze includes phosphorus for elasticity, and silicon bronze contains silicon for welding. Each has slightly different densities and properties.

This calculator is accurate within 2-3% for most bronze alloys using standard density values. Actual weight may vary slightly based on exact alloy composition, manufacturing tolerances, and temperature, but it's reliable for estimation and planning purposes.

How to Calculate

To calculate bronze weight, first determine the shape and measure all dimensions in consistent units (inches or feet). Calculate the volume: for plates, multiply length × width × thickness; for bars, use length × cross-sectional area; for cylinders, use πr²h. Convert volume to cubic feet, then multiply by bronze's density of 541 lb/ft³. The formula is: **Weight = Volume (ft³) × Density (541 lb/ft³)**. If using a specific bronze alloy, adjust the density accordingly (aluminum bronze: 490 lb/ft³, phosphor bronze: 548 lb/ft³, silicon bronze: 523 lb/ft³).

Formula & Method

Weight (lbs) = Volume (ft³) × Density (lb/ft³)

Volume for plate = Length × Width × Thickness
Volume for cylinder = π × Radius² × Height
Standard bronze density = 541 lb/ft³ (8.67 g/cm³)

Sources & References

http://www.matweb.com/
https://www.asminternational.org/
https://www.engineeringtoolbox.com/metal-alloys-densities-d_50.html

Related Calculators

Aluminum Weight Calculator

Calculate aluminum weight instantly for sheets, plates, bars, and extrusions. Enter dimensions and alloy type for accurate weight and material cost estimates.

→

Lead Weight Calculator

Calculate lead sheet and plate weight instantly. Enter dimensions and get accurate weight in pounds and kilograms using lead's 708 lb/ft³ density.

→

Stainless Steel Weight Calculator

Calculate exact weight of stainless steel sheets, plates, bars, and tubes by dimensions. Supports 304 and 316 grades with instant results in pounds or kilogr...

→

Zinc Weight Calculator

Calculate zinc sheet and plate weight instantly from dimensions. Get accurate weights in pounds and kilograms using standard zinc density of 445 lb/ft³.

→

Content reviewed by the ProCalc.ai editorial team · About our standards