Concrete Calculator
Calculate concrete volume for any project. Enter dimensions to get cubic yards, bag counts, and cost estimates for slabs, footings, columns, and walls.
About the Concrete Calculator
Pour planning goes a lot smoother when you can trust your numbers. ProCalc.ai’s Concrete Calculator helps you estimate concrete volume fast for slabs, footings, columns, walls, and other common pours, with a built-in waste allowance so you’re not scrambling for an extra yard at the end of the day. You’ll see cubic yards, bag counts, and cost estimates in one place, so you can order materials and line up labor with fewer surprises. This Concrete Calculator is built for contractors, estimators, and site supervisors who need quick takeoffs that match what actually gets delivered to the jobsite. Use it when you’re pricing a 24' × 30' garage slab and need to confirm how many yards to order, how many 80-lb bags that equals for a small pour alternative, and what the concrete will cost at your local rate. You enter your shape and dimensions (plus thickness, waste percentage, and price per yard or per bag), and you get the concrete quantity, equivalent bags, and total cost in seconds.
How do you calculate the volume of concrete needed for a slab? To calculate the volume of concrete for a slab or footing, multiply its length by its width by its thickness. This will give you the volume in cubic feet. Volume (ft³) = Length × Width × Thickness. Divide this by 27 to convert to cubic yards.
How many cubic yards are in a cubic foot of concrete? There are 27 cubic feet in one cubic yard of concrete. To convert cubic feet to cubic yards, divide the total cubic feet by 27. This conversion is essential for ordering concrete, as it is typically sold by the cubic yard.
How do you calculate the volume of concrete needed for a cylindrical column? To calculate the volume of concrete for a cylindrical column, use the formula: Volume (ft³) = π × Radius² × Height. Ensure all measurements are in feet for consistent units. Divide the resulting cubic feet by 27 to find the volume in cubic yards.
How do you determine the number of concrete bags needed for a project? To determine the number of concrete bags needed, first calculate the total volume of concrete required in cubic feet. Then, divide this total volume by the yield of a single concrete bag (e.g., 0.6 cubic feet for an 80-pound bag). Bags Needed = Volume (ft³) ÷ Bag Yield (ft³).
Concrete Calculator
ProCalc.ai's Concrete Calculator (part of our Construction tools) calculates the weight of concrete in any common shape and dimension. Concrete has a density of 150 lb/ft³ (2,403 kg/m³). Concrete is 69% lighter than steel. Per cubic yard, concrete weighs about 4,050 lbs (2.0 tons).
The calculator supports these shapes: slabs (length × width × depth), fill areas (length × width × depth), and round columns and piers (diameter × height). Select your shape, enter dimensions in inches or feet, and get weight in both pounds and kilograms instantly.
Accurate weight calculations are critical for structural engineering, equipment sizing, hauling and transport logistics, and material ordering on construction sites. The core formula for rectangular shapes is Weight = Length (ft) × Width (ft) × Thickness (ft) × 150 lb/ft³. For round shapes: Weight = π × (Diameter/2)² × Length × 150 (all in feet). For tubes: use the annular area — π × ((OD/2)² − (ID/2)²) × Length × 150. All calculations run instantly in your browser with results in both imperial and metric units.
This calculator is part of ProCalc.ai's library of 101 material weight calculators covering metals, woods, plastics, stone, and building materials. Each uses verified density data from engineering reference sources. For comparing concrete against alternatives, see our material comparison pages.
How to use the Concrete Calculator
You’re about to pour a new patio slab this weekend. The forms are set, the gravel base is compacted, and the truck is scheduled—but you still need to answer the one question that can make or break the day: how much concrete should you order? Too little and you’re scrambling mid-pour; too much and you’ve paid for extra material you can’t return. A Concrete Calculator solves that by converting your project dimensions into cubic yards, estimating bag counts (if mixing by hand), and helping you plan for waste allowance.
What Is a Concrete Calculator?
A Concrete Calculator estimates the volume of concrete needed for common shapes used in construction—most often slabs, footings, and columns. The key output is typically cubic yards because ready-mix concrete is commonly ordered by the yard in many regions. For smaller jobs, the same volume can be converted into the number of premixed bags (often 40, 60, or 80 lb bags, depending on what’s sold locally).
Typical inputs map to what you’re pouring:
- Slab: Length, Width, Depth
- Footing/beam: Length, Width, Depth (often narrower and deeper than slabs)
- Column/pier: Diameter and Height (cylindrical)
Context fact: concrete is heavy—normal-weight concrete is commonly around 140 to 150 lb per cubic foot (varies by mix design and aggregate). That means even a “small” 1 cubic yard pour (27 cubic feet) can weigh roughly 3,780 to 4,050 lb. Planning volume correctly is also planning logistics.
The Formula (and What It Means)
Concrete volume is easiest to compute in cubic feet first, then convert to cubic yards.
ConcreteVolume_yd3 = ConcreteVolume_ft3 / 27
Why divide by 27? Because:
- 1 yard = 3 feet
- 1 cubic yard = 3 × 3 × 3 = 27 cubic feet
Step-by-step in plain English:
- Compute the shape’s volume in cubic feet (ft³) using its geometry.
- Convert ft³ to yd³ by dividing by 27.
- Add a waste factor (commonly 5% to 15%) to cover spillage, uneven subgrade, over-excavation, and form bulge.
Common shape formulas in cubic feet:
- SlabVolume_ft3 = Length_ft × Width_ft × Depth_ft
- CylinderVolume_ft3 = π × (Diameter_ft / 2)² × Height_ft
If dimensions are in inches for depth, convert first:
- Depth_ft = Depth_in / 12
Authoritative note: Concrete proportioning and acceptance criteria are governed by ACI standards (for example, ACI 318 for structural concrete). Local building codes often reference ACI for structural work, and many jurisdictions base code requirements on IBC/IRC adoptions. For slabs-on-grade and residential flatwork, thickness and reinforcement requirements vary by soil, load, and climate—so volume math is only one part of planning.
Step-by-Step Worked Examples (with Real Numbers)
Below are three common pours with the math shown end-to-end.
Example 1: Patio slab (rectangular)
Project: 12 ft by 16 ft slab, 4 inches thick.
Convert thickness to feet
Depth_ft = 4 / 12 = 0.3333 ftCompute volume in cubic feet
SlabVolume_ft3 = 12 × 16 × 0.3333
SlabVolume_ft3 = 64.0 ft³ (rounded)Convert to cubic yards
ConcreteVolume_yd3 = 64.0 / 27
ConcreteVolume_yd3 = 2.370 yd³Add waste allowance (say 10%)
Order_yd3 = 2.370 × 1.10 = 2.607 yd³
Practical ordering: round up to what suppliers deliver (often in 0.25 yd³ increments). That would typically mean ordering about 2.75 yd³ to avoid coming up short.
Example 2: Continuous footing (strip footing)
Project: 40 ft long footing, 18 inches wide, 12 inches deep.
Convert inches to feet
Width_ft = 18 / 12 = 1.5 ft
Depth_ft = 12 / 12 = 1.0 ftVolume in cubic feet
FootingVolume_ft3 = 40 × 1.5 × 1.0
FootingVolume_ft3 = 60 ft³Convert to cubic yards
ConcreteVolume_yd3 = 60 / 27
ConcreteVolume_yd3 = 2.222 yd³Add waste allowance (say 8% for a well-formed trench)
Order_yd3 = 2.222 × 1.08 = 2.400 yd³
If the trench is rough or over-excavated, 12% to 15% waste is more realistic.
Example 3: Round column/pier (cylinder)
Project: 12-inch diameter pier, 6 ft tall.
Convert diameter to feet
Diameter_ft = 12 / 12 = 1.0 ft
Radius_ft = 1.0 / 2 = 0.5 ftVolume in cubic feet (cylinder)
CylinderVolume_ft3 = π × (0.5)² × 6
CylinderVolume_ft3 = 3.1416 × 0.25 × 6
CylinderVolume_ft3 = 4.7124 ft³Convert to cubic yards
ConcreteVolume_yd3 = 4.7124 / 27
ConcreteVolume_yd3 = 0.1745 yd³Add waste allowance (say 10%)
Order_yd3 = 0.1745 × 1.10 = 0.1920 yd³
If mixing bags, you’d convert volume to bag yield (bag yields vary by brand and bag size). Always check the bag label for “yield” in cubic feet per bag, then compute: BagsNeeded = TotalVolume_ft3 / Yield_ft3_per_bag
Common Mistakes to Avoid (and a Pro Tip)
Common Mistake 1: Forgetting to convert inches to feet.
A 4-inch slab is not 4 feet thick. Always do Depth_ft = Depth_in / 12 before multiplying.
Common Mistake 2: Ordering exactly the calculated volume with no waste.
Real pours rarely match perfect geometry. Subgrade dips, forms bow, and some concrete stays in the chute or wheelbarrow. A waste allowance of 5% to 15% is normal depending on how controlled the job is.
Common Mistake 3: Mixing up diameter and radius for columns.
Cylinder volume uses radius squared. If you plug in diameter where radius belongs, the result is 4 times too big.
Common Mistake 4: Ignoring thickness standards for the application.
Many residential slabs-on-grade are commonly 4 inches thick for light duty, while driveways are often thicker (commonly 5 to 6 inches depending on loads and subgrade). Local code, climate (freeze-thaw), and soil conditions matter. For structural elements, follow engineered drawings and ACI-referenced requirements.
Pro Tip: If the pour includes thickened edges, turned-down beams, or haunches, split the job into simple shapes (a slab plus additional rectangular “edge beams,” or a footing plus piers). Add the volumes together, then apply waste once at the end.
When to Use This Calculator vs. Doing It Manually
Use a Concrete Calculator when:
- You’re ordering ready-mix in cubic yards and need a fast, consistent conversion from field dimensions.
- You’re comparing design options (for example, 4-inch vs. 5-inch slab thickness) and want to see how volume changes immediately.
- You’re planning multiple elements—slab plus footings plus columns—and want totals with a consistent waste factor.
- You’re estimating premix bag counts for small pours like fence posts, deck piers, or small pads.
Manual calculation is fine when:
- The shape is a single simple rectangle and you’re comfortable converting units.
- You need a quick check in the field without any extra features like waste allowance or bag conversions.
For anything structural or permitted, volume math is only the quantity step—final thickness, reinforcement, and mix requirements should follow local code and ACI-referenced standards, and engineered plans when applicable.
Formula
Concrete Weight & Volume Formulas
Rectangular slab or footing: Volume (ft³) = Length (ft) × Width (ft) × Thickness (ft) Weight (lb) = Volume (ft³) × 150 lb/ft³
Cylindrical column or pier: Volume (ft³) = π × (Diameter/2)² × Height (all in feet) Weight (lb) = Volume (ft³) × 150 lb/ft³
Convert to cubic yards: Cubic yards = Volume (ft³) ÷ 27
Bags needed: 80 lb bag yields ≈ 0.6 ft³. Bags = Volume (ft³) ÷ 0.6
Standard concrete density is 150 lb/ft³ (2,403 kg/m³) for normal-weight concrete. Lightweight concrete ranges from 90–120 lb/ft³ depending on aggregate type.
Frequently asked questions
How many bags of concrete do I need?
An 80-lb bag yields about 0.6 cubic feet, while a 60-lb bag yields 0.45 cubic feet. Divide your total cubic feet by the yield per bag, then add 5-10% for waste.
What's the difference between cubic yards and cubic feet?
One cubic yard equals 27 cubic feet. Concrete is typically sold by the cubic yard for large projects, but bags are measured in cubic feet yield.
Should I order bagged concrete or ready-mix?
For projects under 1 cubic yard, bags are convenient but labor-intensive. Above 1-2 yards, ready-mix delivery is more cost-effective and saves hours of mixing.
How thick should a concrete slab be?
Standard slabs are 4 inches for walkways and patios, 5-6 inches for driveways and garages. Footings and structural elements require engineer-specified depths based on load and soil conditions.
Why add a waste allowance?
Concrete waste accounts for spillage, uneven subgrade, and over-excavation. A 5-10% allowance ensures you don't run short mid-pour, which can compromise the project.
How accurate is the Concrete Calculator?
The calculator is accurate when you enter correct dimensions and choose the right shape and thickness. Results are theoretical volume and do not account for subgrade irregularities, form bulge, or spillage unless you add a waste factor. For ready-mix, rounding up to the next 0.25–0.5 cubic yard is common to avoid coming up short.
How does the Concrete Calculator work?
It computes concrete volume from your measurements by applying standard geometry (length × width × thickness for slabs, and shape-specific formulas for footings, columns, or holes). It then converts that volume into common ordering units such as cubic yards, cubic feet, or number of bags based on the bag yield you select. Any additional allowance is applied as a percentage increase to the calculated volume.
Can I use this for sonotube piers or fence post holes?
Yes—use the cylinder or round-hole option and enter the diameter and depth of each pier or hole. Multiply by the number of holes to get total volume, or calculate one and scale up. If the hole flares or is irregular, use the average diameter and add extra allowance.